Single-wave rubber expansion joints Kompenz™ КРК
Construction
- For axial, lateral and angular movements;
- For different medium, temperature and pressure according to used materials and construction
|
Range of application
- Refrigiration pipeline on power plants;
- Domestic water supply, alimentary pipelines (special material);
- Pipelines with pumping equipment, turbines, compressors;
Material of construction
- Different types of cord for increase of operating pressure up to 40 bar;
- Use of retain ring for work with vacuum;
|
| Diameter, mm |
25—4000 |
| Built-in length, mm |
95—1000 |
| Maximum pressure, bar |
60 |
| Attachement flange |
DIN, ANSI, AWWA and any other standards, as well as according to your drawing |
Single-wave rubber expansion joints Kompenz™ KPC
Construction
- Single-wave rubber expansion joints Kompenz™ KPC
- For different medium, temperature and pressure according to used materials and construction;
- Except torsion of expansion joint;
- Prevent movements of expansion joint above the specified technical conditions;
- Take off the end thrust;
|
Range of application
- Refrigiration pipeline on power plants;
- Domestic water supply, alimentary pipelines (special material);
- Pipelines with pumping equipment, turbines, compressors;
Material of construction
- Different types of cord for increase of operating pressure up to 40 bar;
- Use of retain ring for work with vacuum;
- Individual attention to tie rod system engineering due to operational criteria of expansion joints;
|
| Diameter, mm |
100 — 4000 |
| Built-in length, mm |
130 — 1000 |
| Maximum pressure, bar |
60 |
| Attachement flange |
DIN, ANSI, AWWA and any standards, as well as according to your drawing |
| Maximum compensation capacity, mm, degrees. |
axial — 50; lateral — 50; angular — 5° |
Single-wave rubber expansion joints Kompenz™ КPY
Construction
- For axial, lateral and angular movements;
- For different medium, temperature and pressure according to used materials and construction;
- Except torsion of expansion joint;
- Prevent movements of expansion joint above the specified technical conditions;
- Take off the end thrust;
|
Range of application
- Refrigiration pipeline on power plants;
- Domestic water supply, alimentary pipelines (special material);
- Pipelines with pumping equipment, turbines, compressors;
Material of construction
- Different types of cord for increase of operating pressure up to 40 bar;
- Use of retain ring for work with vacuum;
|
| Diameter, mm |
100 — 4000 |
| Built-in length, mm |
130 — 1000 |
| Maximum pressure, bar |
60 |
| Attachement flange |
DIN, ANSI, AWWA and any other standards, as well as according to your drawing |
| Maximum compensation capacity, mm, degrees. |
angular — 0.5—40° |
Single-wave rubber expansion joints Kompenz™ KPK with high wrinkle
Construction
- For axial, lateral and angular movements;
- For different medium, temperature and pressure according to used materials and construction;
- Compensation of big movements due to special form of wrinkle;
|
Range of application
- Refrigiration pipeline on power plants;
- Domestic water supply, alimentary pipelines (special material);
- Pipelines with pumping equipment, turbines, compressors;
Material of construction
- Different types of cord for increase of operating pressure up to 40 bar;
- Use of retain ring for work with vacuum;
- Screwed holes on the pipelines;
|
| Diameter, mm |
32 - 300 |
| Built-in length, mm |
105 |
| Maximum pressure, bar |
60 |
| Attachement flange |
DIN, ANSI, AWWA and any other standards, as well as according to your drawing |
| It is connected to the counter flange with pin studs. |
|
